Boundary Waters Quetico Forum :: Items For Sale or Wanted :: Wanted: REI Half Dome 2 HC Footprint
|
Author | Message Text | ||
butthead |
quote Royce: " Tyvek accessories Ebay butthead |
||
mjmkjun |
quote Royce: " I didn't on mine since it's an inch shorter dimension than the tent footprint. It don't think grommets would hold long. It's strong stuff but any hole tends to weaken fabric weave. Prepare beforehand: Run an oversized rough cut-out in cold water wash (no soap). TWO wash cycles gets it wrinkled & quiet as it's going to get. Measure, cut, fold 1" seam & gorilla glue. Done. You could glue in loops (for stakes) at the corners when you fold seams. |
||
misqua |
|
||
Dammfast |
|
||
gkimball |
|
||
wingnut |
Here's a pic of one I made with a piece that I got from ebay. Just rolled the corner back and sewed in a nylon webbing strip then added grommets in the right place so the tent poles hold it in place. |
||
Royce |
Thanks for the replies, will have to take a look at the tyvek option. Do you add webbing/gromits to tyvek? |
||
Royce |
Thought I would check on here to see if anyone has available a footprint for the REI Half Dome 2HC. Their current models all have different dimensions from what I can tell. Have tarp that I use for it, but would like the properly fitted footprint. Thanks, |